Wholesale Kitchen & Bathroom Cabinets
Quote List 0

PLAN YOUR PROJECT

Assembly Videos

Step-by-step videos for your ready-to-assemble cabinets.

Choose your cabinet type below. Select Watch video to load a video player.

Framed Cabinetry Assembly

Applicable to all of our collections besides the frameless cabinets.

Frameless Cabinetry Assembly

For our frameless cabinet collections only. The assembly method differs from framed cabinetry.

Helpful Tools

Most of our cabinets go together with basic household tools. Here is what we recommend for starters.

Cordless drill with a Phillips driver bit

Cordless Drill / Driver

A #2 Phillips bit and a low clutch setting — drive screws and hinge plates without stripping them.

Three titanium-coated twist drill bits

Drill Bit

It's always a good idea to pre-drill the drawer box before screwing in the glide attachments to prevent the wood from cracking.

23-gauge pin nailer with a black magazine and red trigger

Pin Nailer

23g nail gun with 1-3/16" headless pin nails for the dovetail drawers. You can switch this out with wood glue if you prefer that method.

18-gauge brad nailer with a black magazine and red trigger

Brad Nailer

18g brad nail gun to help secure the side panels to the back panel. Alternatively, you can use wood glue and the provided metal clips, but this method is a lot slower.

Rubber mallet with a wooden handle

Rubber Mallet

Use a scrap piece of 2x4 and line it up on the dovetail drawer joints before you tap the panels in place. This ensures that you get even pressure joining the drawer box together.

Two bar clamps with orange handles

Clamps

Clamps help when you need to glue panels together.

Folded quilted furniture blanket

Furniture Blanket

This helps avoid scratching the door and drawer fronts when you begin your assembly with the cabinet front facing down.

Work table with a smooth plywood top

Flat Table

Having a solid, flat surface to assemble is very helpful to avoid having to kneel or squat down to the floor to assemble. Less effort for you.

  • Set your drill to a low clutch setting — overtightening splits panel edges.
  • Dry-fit every shelf and hinge before you drive a single screw.
  • Two people are easier than one for tall and wall cabinets.